Seat Functions - Otto Bock C2000 Instructions For Use Manual

Operation
Pull back the metal slide on the battery charger's plug and
disconnect the battery charger from the power wheelchair.
6. Turn on the controls. The power wheelchair is ready for
driving.
Fig. 22 Connecting the battery charger to the power wheelchair
1 Charging receptacle
Page 148
The battery charger indicates the following states:
Display
Yellow LED is lit
Yellow LED flashes
Green LED is lit
Red LED is lit
Red LED flashes
Tab. 5 Battery capacity indicator on the battery charger
If none of the LEDs are lit, there is no power supply.
6.7 Seat Functions
WARNING
Risk of pinching or crushing in the electric seat adjustment
range. When operating the seat height adjustment, back
angle adjustment (optional) or seat tilt (optional), there are
pinch and shear points in the area between the seat frame
and wheelchair frame caused by the construction.
01 / 2010
Function
Battery is charging
Battery is charged to 90 %
Battery is fully charged
Incorrect polarity (unplug the
battery charger from the wall
socket)
Battery is defective, or charging
time has been exceeded
C2000