Operation
Display symbol(s) Information
Electric back angle adjustment
Electric seat tilt
Coupled electric backrest and seat
tilt adjustment
Seat height adjustment
Footrests
Tab. 3
Display of electric seat functions on the control panel
Page 140
6.3.6 Drive-away Lock
INFORMATION
The drive-away lock can be activated as described in the
following, only if the "drive-away lock" parameter has been
set to "On". At the factory, the drive-away lock parameter
is set to "Off".
It is also possible that the factory setting has been changed
to "On" if requested with the order or by the specialist
dealer. Please ask your specialist dealer about the setting
selected for your wheelchair.
The control unit of the C2000 power wheelchair features an
electric drive-away lock to disable the driving function.
Activation via control panel
1. With the control unit turned on, press and hold the mode
button for at least 5 seconds.
2. A short beep confirms activation of the drive-away lock (if
the feature that returns a beep with each push of a button
is activated, then the second beep confirms activation of
the drive-away lock).
3. The control unit is turned off automatically.
Activation of the drive-away lock is indicated by the key sym-
bol on the display.
01 / 2010
C2000