Switching On And Off; Fig. 17 Lcd Display With All Symbols - Otto Bock C2000 Instructions For Use Manual

LCD Display
The LCD display is the communication interface between the
user and the control unit. It indicates the selected speed
level, the remaining battery capacity, the status of electric
options and special functions as well as warnings and errors.
During the start phase, all display symbols are visible.
Fig. 17 LCD display with all symbols
1 Direction indicator, left
2 Battery capacity
3 Electric backrest
C2000
9 Excess temperature
10 Direction indicator, right
11 Drive wheel brake
4 Electric seat tilt
5 Control panel
6 Drive-away lock
7 Speed level
8 Open-end wrench
6.3.2 Switching On and Off
WARNING
Risk of death due to lack of brake functionality. The brake
release lever must be locked when using the power wheel-
chair. The automatic brakes must be operational and func-
tional.
CAUTION
Risk of accidents due to incorrect tyre pressure. Visually
inspect the tyres of the power wheelchair for sufficient tread
depth and sufficient tyre pressure before each use. Incorrect
tyre pressure reduces the life of the tyres and impairs the
driving characteristics.
The control unit of the power wheelchair is switched on and
off by pressing the on / off button (see Fig. 15, Item 5). If the
control is not used for a certain time, which is adjustable, the
01 / 2010
Operation
12 Warning
13 Creep speed
14 Power module
15 Drive motor
16 Light
Page 135