Applying the Lap Belt
1. Push the two halves of the buckle together so they engage.
The belt buckle must snap in place audibly.
2. Verify that the belt has locked by trying to pulling it apart.
The lap belt should not be too tight on the body. Objects
caught under the belt can cause painful pressure sores.
Opening the Lap Belt
1. Press the red release button to open the belt.
C2000
Changing the belt length
The belt length can be adjusted on both sides.
1. Position both buckle halves in the middle of the body.
2. After positioning the buckle halves at a right angle in rela-
tion to the belt, their position can be varied. Any excessive
belt length will be held in place by the plastic slides.
Fig. 35
Applying the lap belt
01 / 2010
Accessories
Page 165