Fig. 18 Drive-Away Lock Information Window - Otto Bock C2000 Instructions For Use Manual

Front-wheel drive and rear-wheel drive
Table of Contents

Advertisement

Available languages

Available languages

Display
Information
symbol(s)
Drive-away lock
Tab. 4
Display of the drive-away lock on the control panel
Activation via separate LCD monitor
If a special control is used, the drive-away lock is activated 
using the separate LCD monitor. Select the menu item "Drive-
away lock" in the menu "Settings". Activation is confirmed 
with an acoustic signal and the control unit is switched off.
C2000
Fig. 18
Drive-away lock information window
Deactivation via control panel
1.  Press the On / Off button to turn on the control.
2.  Move the joystick into the front end position until you hear 
a beep.
3.  Move the joystick into the rear end position until you hear 
a beep.
4.  Release the joystick.
5.  Another beep confirms the successful deactivation of the 
drive-away lock.
01 / 2010
Operation
Page 141 

Advertisement

Chapters

Table of Contents
loading

Table of Contents