Table of Contents
Advertisement
Use
25
8.10 Seat
8.10.1 Safety instructions
WARNING
Seat cushions and back support pads may ignite
Burns due to user error
► The seat and back support upholstery as well as seat cushions, padding and covers fulfil the normative
requirements for flame resistance. However, they may still ignite if fire is handled improperly or negligently.
► Keep away from all ignition sources, especially lit cigarettes.
NOTICE
Improper use
Damage to the seat surface due to user error
► Do not allow the seat to come into contact with sharp objects. This also applies to animals such as pet cats
with sharp claws.
► If the seat is expected to come into contact with liquid, such as spilt drinks or episodes of incontinence,
always use it in conjunction with a liquid-repellent cover.
► Only use the Ottobock incontinence covers for this product. Contact the qualified personnel to obtain a spare
Ottobock cover.
8.10.2 Seat type
The product is equipped with a standard seat.
8.10.3 Headrest
The head support or head/neckrest stabilises and guides the user's head. It has been mounted to the mounting kit
for head/neckrests by qualified personnel.
Detailed information regarding use, maintenance and repair can be found in the included instructions for use.
8.11 Power seat functions
The power wheelchair can be equipped with a range of different optional power seat functions.
For more information on the specific equipment of this power wheelchair, contact the qualified personnel.
38
Charging process via the control panel
1) Turn the control unit on the power wheelchair off.
2) Plug the battery charger plug into the charging
receptacle on the power wheelchair control panel
(see fig. 25).
3) Connect the battery charger to the mains socket
and turn it on.
→ The charging process starts automatically and
the battery charge level is indicated by the LCD
screen on the control panel and on the battery
charger.
4) Turn the battery charger off and pull the plug out of
the mains socket when the charging process is
complete.
5) Disconnect the battery charger plug from the con
trol panel.
6) Turn the power wheelchair control unit on. The
power wheelchair is ready to use.
Skippi Plus
Advertisement
Table of Contents
