Safety
If any malfunctions occur such as an insufficient supply of
energy to the brake, the software will recognise them and
trigger the emergency stop brake or reduce the speed of
the power wheelchair. At the same time, a warning signal
will be emitted.
INFORMATION
After each emergency stop, the controls of the power wheel-
chair must be turned on again. In the event of communica-
tion problems in the bus system of the controls, the system
triggers an emergency stop and thus prevents any uncon-
trolled functions. If the driving function is still not available
after switching the controls on again, unlock the brakes to
activate the push mode. In this case, contact a specialist
dealer as soon as possible.
01 / 2010
Page 115
C2000