Fig. 21 Releasing The Brake - Otto Bock C2000 Instructions For Use Manual

Operation
the brake by means of the mechanical release mechanism.
The brake release is located on the opposite side of the fuse /
charging receptacle on the lateral frame.
Releasing the brake
For safety reasons, you first need to pull out the brake release
bolt.
INFORMATION
When in this position, the brake must still be engaged! Should
the pushing function already be active at this stage, please
contact your wheelchair supplier.
INFORMATION
When the joystick is activated while the brakes are unlocked,
the control system emits an error signal on the control
panel. If this is not the case, there is a malfunction that must
be corrected immediately by a specialist dealer.
Now the brake release lever has been released and can be
pressed fully forwards.
Page 144
Fig. 21 Releasing the brake
1 Brake release bolt
In this position, the control unit will recognise that the brake
has been released and automatically deactivate the driving
function. As soon as the joystick is deflected, a warning will
appear on the LCD display.
INFORMATION
Once the brake release lever has been released, all braking
systems are deactivated.
01 / 2010
1
2
2 Brake release lever
C2000