Table of Contents
Advertisement
REMOVING THE MONEY ACCEPTORS
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug dryers or disconnect power.
2.
Turn off gas supply to dryers.
3.
Remove the console (see step 3 on page
4-35 for the procedure).
Coinslide
Coinbox
Example Of Various Money Acceptor Configurations
4.
Coindrop
Coinbox
4-38
To remove the coinslide assembly:
a) Using a 5/16" socket, unscrew the re-
taining bolt from the money acceptor,
and remove the bolt from inside the
console opening.
Coinslide Retaining Bolt
b) Lift the coinslide and pull it forward out
of the unit.
c) Unplug the two wires from the coinslide
switch.
d) Remove the ground wire screw from
the bottom of the coinslide assembly.
Coinslide Switch
With 2 Wires
Advertisement
Table of Contents
