Table of Contents
Advertisement
6. Keypads are now re-mapped for navigating
the settings as listed in the following "Key-
pad Mapping" table.
KEYPAD MAPPING
Washer
Keypad
HOT
Move up to the preceding
1
item on the list.
WARM
Move down to the
2
next item on the list.
COLD
Select an item to view
3
the current setting.
NORMAL
NO FUNCTION
4
GENTLE
NO FUNCTION
5
Exit OWNER SETTINGS
HIDDEN
program. The display
6
returns to the cycle count.
Washer Keypad Positions
HOT
1
WARM
2
COLD
3
Dryer Keypad Positions
HIGH
1
MEDIUM
2
LOW
3
Dryer
Keypad
HIGH
1
MEDIUM
2
LOW
3
ON
4
OFF
5
START
6
NORMAL
4
GENTLE
5
HIDDEN
6
ON
4
OFF
5
START
6
7. If the service calls for a free-vend, push and
release keypad #3 (see the "Keypad Posi-
tions"). The unit is now ready for use as if
money was used. On dryers, push and
release keypad #6 to start.
8. If a money acceptor has been installed,
press keypad #1 to enter the "Owner Set-
tings."
9. Scroll through the owner settings using
keypad #1 or #2 until the proper money
acceptor is located (droP, SLidE, or CArd).
(See the OWNER SETTINGS tables in
Section 6.)
NOTE: Keypad #6 is hidden on two-speed
washers. Keypads #4, #5, and #6 are hidden
on single-speed washers.
10. Press keypad #3 to view the current setting
of the selected money acceptor. To change
the setting, use keypad #2 to toggle be-
tween 0 (disabled) and 1 (enabled).
KEYPAD NAVIGATION
Washer
Keypad
Increase the setting value.
HOT
Push and hold the keypad for a
1
Decrease the setting value.
WARM
Push and hold the keypad for a
2
COLD
3
NORMAL
4
GENTLE
5
Accept the new setting value.
HIDDEN
The display returns to the
6
OWNER SETTINGS list.
2-37
fast increase.
fast decrease.
NO FUNCTION
NO FUNCTION
NO FUNCTION
Dryer
Keypad
HIGH
1
MEDIUM
2
LOW
3
ON
4
OFF
5
START
6
Advertisement
Table of Contents
