Removing The Money Acceptors & Metercase - Whirlpool ADVANTECH CAE2761K Installation, Operation And Service Instructions

REMOVING THE MONEY ACCEPTORS & METERCASE
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug dryer or disconnect power.
2. Turn off gas supply to dryer.
3. Unlock the service access door and re-
move it from the top of the metercase.
Access Door
Coinslide
Switch (inside)
On Coinslide
Extension
4.
Metercase
Coinslide
Assembly
Coinbox
4-29
To remove the coinslide assembly:
a) Using a 5/16" socket, unscrew the re-
taining bolt from the money acceptor,
and remove the bolt from inside the
metercase.
5/16" Retaining Bolt
b) Remove the 5/16" hex-head screw from
the coinslide green ground wire that is
attached inside the metercase.
Continued on the next page.
Ground Wire