Table of Contents
Advertisement
4.
To remove the water level switch:
a) Press the locking tab on the water level
switch, then rotate the switch in either
direction until the square extrusion
aligns with the cutout in the rear panel,
and remove the switch.
Turn 90°
Water Level Switch
b) Disconnect the air hose and wire connec-
tor from the switch.
Locking
Tab
Air Hose
5.
To remove the drain hose assembly:
a) Remove the 5/16" hex-head screw from
b) Tilt the cabinet forward to lift the rear of
c) Reach under the unit and gently pull
Locking
Tab
d) Pull the drain hose off the drain hose
Wire
Connector
4-24
the drain hose assembly.
the unit.
down on the drain hose assembly lock-
ing tab, and push the assembly out
through the rear panel.
5/16 "
Screw
Drain Hose
Assembly
Tab
assembly.
Dran Hose
Assembly
Drain Hose
Advertisement
Table of Contents
