Table of Contents
Advertisement
7. Connect the remaining quencher wire in place of the pink wire on the pressure switch.
8. Connect the pink wire to the piggyback connector on the quencher wire.
9. Route the black quencher wires, along with the pink and tan wires, and use a wire tie to tie them together near the
quencher body.
10. Close and secure the console.
11. Reconnect power to the washer.
QUENCHER PART NUMBER 3952286 INSTALLED
ACROSS PRESSURE SWITCH EMPTY CIRCUIT
SUPPRESSOR PART NUMBER
3951390 INSTALLED ON LINE
WATER LEVEL
S W I T C H
P
T
— 3 —
QUENCHER
V-W
(continued)
Advertisement
Table of Contents
