Table of Contents
Advertisement
REMOVING THE CONSOLE COMPONENTS
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug dryers or disconnect power.
2.
Turn off gas supply to dryers.
Stack Dryers
Console
4-35
3.
To remove the console:
a) Unlock the console, pull the right side
out, and remove the console from the
unit so you can access the wiring.
b) Disconnect the two P1 connectors for
the upper and lower dryers from the
display boards.
c) Remove the 5/16" hex-head screw from
the console securing the red retaining
wire and green ground wire.
Display Boards
Ground Screw
Continued on the next page.
Console Lock
P1 Connectors
Advertisement
Table of Contents
