Table of Contents
Advertisement
CONTROL SETUP:
HANDHELD PALM
Detailed Palm
enabled set up information can
be obtained from the Software User's Manual,
Part #8524743.
This section will cover the installation of a
template from the Palm
For advanced features such as template cre-
ation requiring use of the management soft-
ware, see the Software User's Manual, Part
#8524743.
NOTE: The following procedure assumes that
security, locations and templates have already
been established using the management soft-
ware program and that the selected Palm
performed a HotSync
software.
1. To start the Handheld Software, remove
the Palm
handheld from its cradle and turn
it on.
2. Check the battery power by pressing the
HOME button with the stylus. 50% or more
battery power is needed.
3. Using the stylus, tap the Palm
and scroll to the ADVANTECH
4. Tap the ADVANTECH
5. The Welcome screen will appear.
(PDA) DEVICE
to a washer or dryer.
with the management
handheld,
icon.
icon.
6. Tap on Continue.
7. The Login screen appears.
8. Select the correct Servicer ID, and enter
the corresponding password using the
has
Graffiti
9. Tap on Continue. The Select a location
window appears. Select the appropriate
location, then tap on Continue.
10. After logging in and selecting the appropri-
ate location, the Select a command screen
appears.
2-39
writing method.
Advertisement
Table of Contents
