Table of Contents
Advertisement
l) Use a pair of pliers and remove the pad
assembly from the clutch drum.
Clutch Pad Assembly
Less Than 1/10"
Replace Clutch Pad Assembly
m) Clean the inner surface of the clutch
drum and the clutch pad assembly
surfaces with an approved solvent,
such as brake cleaner. Both assem-
blies must be free of dirt, oil, and grease
so that the proper spin speed and
water extraction may be achieved.
Drum
NOTE: For an exploded parts view of the
transmission, refer to section 8.
4-15
n) Inspect the inside contact surface of
the drum for scratch marks, or uneven
wear. Inspect the clutch pad assembly
for loose, or worn pads (see the inset
photo to the left). If the distance be-
tween the clutch pad contact surface
and the clutch pad rivet head is less
than 1/10", replace the clutch assembly
with part #285785.
o) Remove the motor from the transmis-
sion (see step 6 on page 4-12 for the
procedure).
p) Remove the two 1/2" hex-head bolts
from the motor plate and remove the
plate.
1/2" Hex-Head Bolts
Motor
Plate
Advertisement
Table of Contents
