Listening Modes; Selecting A Listening Mode; Dts + Dolby Listening Modes - Lexicon RV-5 User Manual

Lexicon rv-5: user guide
Hide thumbs Also See for RV-5:
Table of Contents

Advertisement

RV-5

LISTENING MODES

The RV-5 has a large selection of listening modes to choose from. The list of available listening modes is broken into two parts - the Mode Family
and the Mode. The available listening modes vary depending upon the Mode Family selections, the input setup, and the incoming audio signal.
The RV-5 features the ability to turn off selected listening mode families so that those options do not appear in the list of available listening modes.
See the following section, "Surround Configuration", for more information. The RV-5 also features the ability to modify elements of the Dolby
listening modes, PLIIx and PLII, to better suit your listening preference. See the "Dolby Configuration" section found later in this chapter for more
information.

SELECTING A LISTENING MODE

The Input Setup menu allows the user to select the initial listening
mode and mode family that will be applied to any incoming data
stream on that specific input. However, setting the input Mode
Family and Mode parameters does not prevent other listening modes
from being available through the Mode buttons.
The Front Panel Mode
and
scan through the available listening modes in the selected family for a
given input or incoming data stream. The Remote Control Channel
and
buttons perform the same function.
To select a different Mode Family, the remote control touch screen
must be set to the first page of the LEX menu. Then selecting the
DOLBY, DTS, DSP, or STER from the touch screen switches the Mode
button selections to any listening modes available for each of those
families, respectively.
buttons allow the user to quickly
The RV-5 process of signal identification and listening mode selection
is shown below:
Incoming Signal
RV-5 builds the
available mode list

DTS + DOLBY LISTENING MODES

When a DTS soundtrack is playing, the Mode Family menu for DTS
contains two options. The DTS selection provides the currently
available DTS listening modes. The Dolby selection contains two
additional listening modes: DTS + PLIIx Film and DTS + PLIIx Music.
Note: These DTS + Dolby listening modes are ONLY available when the
incoming data stream is DTS.
Setup
RV-5 identifies
incoming signal
RV-5 identifies which
surround modes have
been turned off
3-23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents