Product Structures - HP 6000 330s Owner's Manual

Models 330S and 660S
1-2 Mass Storage System
HP
Series 6000
The base product structure of the HP Series 6000 Models
330S and 660S Mass Storage Systems is a power supply
with one hard disk drive. The left rear slot always
contains the power supply. The other slots may contain
a variety of embedded peripherals, such as a rewritable
optical disk drive, CD-ROM drive, or DAT drive. The
following table shows the product structures allowed for
add-on peripherals. Other chapters in this manual describe
the add-on peripherals that can be ordered for the mass
storage system.
Table 1-1. Product Structures
Slot Position Device Allowed
1
Right Front Full-Height Hard Disk,
Digital Audio Tape Drive, or
Rewritable Optical Disk Drive.
2 Right Rear Full-Height Hard Disk Only.
3 Left Front
Full-Height Hard Disk, Digital
Audio Tape Drive, or
3 Left-Front Top Half-Height CD-ROM Drive.
3 Left-Front Bottom Half-Height CD-ROM Drive.