Table of Contents
Advertisement
HP Series 6000
Models 330S and 660S
If
you are installing two CD-ROM drives at the same time
(from two upgrade kits), perform the following steps:
1. Place both of the CD-ROM drives on the conductive
sheet.
2. Remove the T10 bracket screws from the CD-ROM drive
and the mounting bracket you received in one of the
upgrade kits.
3. Remove the CD-ROM drive from the mounting bracket
and install it into the lower level of the mounting
bracket you received in the other upgrade kit.
4. Secure the CD-ROM drive in the mounting bracket with
the T10 bracket screws (see Figure 4-9).
CD-ROM Drive 4-35
Advertisement
Table of Contents
