Table of Contents
Advertisement
Models 330S and 660S
HP Series 6000
Learning About Upgrade Kit Parts
2-10
Hard Disk Drive
The following paragraphs describe the characteristics and
functions of the parts in the C2290A and C2291A upgrade
kits.
Hard Disk Drive
See "Product Description" in this chapter.
Power Cable
The power cable is a 4-pin connector that provides dc power
to the hard disk drive.
Conductive Sheet
The conductive sheet is an anti-static mat that is placed
under the hard disk drive to prevent electrostatic damage.
Foam Pad
The foam pad is placed under the hard disk drive to
prevent mechanical shock and vibration damage to the hard
disk drive when the hard disk drive is not mounted in the
mass storage system chassis.
Wrist Ground Strap
The wrist ground strap is used to ensure that the hard disk
drive, the conductive sheet, and your hand are all at the
same electrical potential.
T25 Screw
The T25 screw is used to secure the hard disk drive to the
mass storage system chassis.
Hex Standoff
The hex standoff is use when a hard disk drive is installed
(or moved) into slot 2.
Advertisement
Table of Contents
