Table of Contents
Advertisement
Models 330S and 660S
Serial Number
Shipping
Preventive Maintenance
1-18 Mass Storage System
HP Series 6000
This section describes how to maintain the mass storage
system and return it if it requires service.
Each mass storage system has a serial number recorded on
the rear panel. It is a good idea
to
keep a record of this
serial number. Should your mass storage system be stolen
or lost, the serial number is often necessary for tracing and
recovery, as well as any insurance claims.
If
it becomes necessary to ship the mass storage system for
repair, use the original container and packaging material
supplied. Before shipment, the container should have an
attached tag identifying your name and address and the
service or repair needed. Include the equipment model
number and full serial number. The serial number is
located on the back of the mass storage system. Pack the
mass storage system as shown in Figure 1-1.
Remove all cables from the mass storage system before
shipping. Seal the container securely with adhesive tape.
Also, we recommend that all shipments be insured.
If
the original container is not available, consult your local
dealer or Hewlett-Packard Sales and Support Office for
information about how to obtain replacement packaging
material.
There are no operator serviceable parts inside the mass
storage system. Refer servicing to qualified personnel.
No regularly scheduled preventive maintenance is required
for the mass storage system, however, peripherals installed
within the mass storage system (other than the hard disk)
Advertisement
Table of Contents
