HP Series 6000
Switching on Power
Models 330S and 660S
The following paragraphs describe how to operate your
CD-ROM drive with a CD-ROM disk and your host
computer.
Do not operate your CD-ROM drive if it has been
exposed to extreme temperatures, such as being left in an
automobile overnight in cold weather. Your CD-ROM drive
must stabilize at room temperature for two hours before
operation. Operating your CD-ROM drive when it is very
cold o'r very hot could cause damage to your CD-ROM
drive. Refer to the end of this chapter and also to. chapter
1 for limits on temperature and humidity for your mass
storage system.
To switch on power to your CD-ROM drive, push in the
( UN E - )
switch on the mass storage system front panel.
To switch off power to your CD-ROM drive, push in the
( UN
E - )
switch then release it until it is fully extended out.
(See Figure 1-2 in chapter 1 for the location of the
(UNE-)
switch.)
CD-ROM Drive 4·5