HP 6000 330s Owner's Manual page 150

Models 330S and 660S
4·14 CD·ROM Drive
HP Series 6000
The following paragraphs describe how to install a
CD-ROM drive into your mass storage system. Two
CD-ROM drives can be added to your mass storage system
as upgrade kits. The C2293A upgrade kit includes one
CD-ROM drive.
This installation procedure is written for personal
computer dealers, technicians, and others who are
familiar with setting up mass storage devices. If you
are not experienced with such tasks, please find an
experienced person to help you or contact your local
Hewlett-Packard Sales and Support Office.
CD-ROM drives can only be installed into slot 3.
After installing CD-ROM drives into your mass storage
system, your mass storage system must be carefully
reassembled to ensure compliance with RFI emission
requirements and to provide adequate protection against
electrical shock and fire hazards.