Models 330S and 660S
HP Series 6000
Checking the Busy Lights
When the DAT drive power is switched on, the DAT drive
automatically performs a self-test. The cassette busy light
indicates the status of the DAT cassette during the self-test
and during activity with the host computer. The drive
busy light indicates the status of the DAT drive during the
self-test and during activity with the host computer. Both
busy lights are light-emitting diodes (LEDs) located on the
front panel of the DAT drive, and can display either green
or yellow colors (see Figure 5-3).
Table 5-2 shows the status of the DAT cassette and DAT
drive busy lights during normal operation of the DAT drive,
and Table 5-3 shows the status of the DAT cassette and
DAT drive busy lights during fault conditions.
If
the DAT drive fails the self-test, contact your local
Hewlett-Packard Sales and Support Office.
5-10
Digital Audio Tape Drive