Cleaning The Flushing Pad (When It Is Dirty) - Epson SC-S70600 series User Manual

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Insertable media holding plates
Remove the media holding plates and wipe stains
from the front and rear surfaces.
Maintenance
H
Open the left maintenance cover and clean
inside.
Wipe lint and dust with a brush or soft cloth that
has been soaked in water and squeezed well.
I
After cleaning, close the front cover and left
maintenance cover.
Cleaning the Flushing Pad (When
It Is Dirty)
If lint or dust adhere to the surface of the flushing pad, it
may contact the the print head and clog nozzles. Use the
following procedure for cleaning.
Before starting this procedure, be sure to read the
following:
"Precautions regarding maintenance" on
U
page 102
115