Epson SC-S70600 series User Manual page 174

Hide thumbs Also See for SC-S70600 series:
Table of Contents

Advertisement

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
*1
Epson recommends the use of genuine Epson ink cartridges. Epson cannot guarantee the quality or reliability of
nongenuine ink. The use of non-genuine ink may cause damage that is not covered by Epson's warranties, and
under certain circumstances, may cause erratic printer behavior.
Information about non-genuine ink levels may not be displayed, and use of non-genuine ink is recorded for
possible use in service support.
*2
When switching the Orange ink type, see the "Using Orange Ink" (PDF) to perform the operations correctly. If
the operations are not performed correctly and a different type of Orange ink is installed, an error occurs and the
printer cannot be used.
UUsing Orange Ink (PDF)
Others
Product
Cleaning cartridge
Maintenance Kit
Secondary Carriage Rod Grease Kit
Ink Cleaner
Waste Ink Bottle
Cleaning Wiper
Cleaning Stick
*1
Clean Room Wiper
*2
Flushing Pad
*2
Wiper Kit
Media Holding Plate
Additional Print Drying System
Heavy Roll Media System
Appendix
Part number
T6990
T7241
S210036
T6993
T7240
S090012
S090013
S090016
S090014
S090015
C12C932121
C12C890751
C12C890761
174
Explanation
Used to change the color mode to 8 Color (Unfixed) or 9
Color for Head Washing, Pre-Storage Maint., or Change
Color Mode.
Contains the cleaning sticks, gloves, wiper, wiper cleaner,
flushing pad and cleaning wiper required for printer
maintenance.
"Cleaning" on page 103
U
Identical to the grease kit supplied with the printer.
"Applying Secondary Carriage Rod Grease" on
U
page 135
Identical to the ink cleaner supplied with the printer.
"Cleaning" on page 103
U
Identical to the waste ink bottle supplied with the printer.
Identical to the maintenance kit items supplied with the
printer.
Wiper and wiper cleaner set identical to items supplied
with the printer.
Identical to the sliding media holding plate supplied with
the printer. Sold on a 1-plate basis. When replacing a
removable media holding plate, replace both the right
and left plates together.
"Replacing the media holding plates" on page 123
U
Uses a fan to blow air over the media and assist drying.
Supplied with SC-S50600 series printers.
"Heating & Drying" on page 89
U
A media feeding unit and auto take-up reel unit for heavy
rolls (up to 80 kg).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc-s50600 seriesSc-s30600 series

Table of Contents