U "Replacing The Wiper And Wiper Cleaner - Epson SC-S70600 series User Manual

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
"Replacing the Wiper and Wiper Cleaner"
U
on page 120
D
Remove lint or dust that has adhered to the
bottom surface of the wiper cleaner using
tweezers.
E
Clean the wiper rail once every two weeks.
If two weeks have not passed since the last time
the wiper rail was cleaned, go to step 6.
"Cleaning the Wiper Rail (Once Every Two
U
Weeks)" on page 112
Maintenance
F
Attach the wiper cleaner.
Place on the attachment point and press down
until you hear a click.
For the SC-S70600 series and SC-S50600 series,
clean the other wiper cleaner in the same way.
G
After cleaning, close the right maintenance cover
and press the Z button.
The menus will close when the print head returns to its
normal position.
To continuously make prints, perform Nozzle Check.
"Printing nozzle check patterns" on page 128
U
Disposing of used ink cleaner, cleaning stick, and
clean-room wipers U
on page 126
110
"Disposal of used consumables"