Epson SC-S70600 series User Manual page 46

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
G
Fully insert the left roll holder. Next, tighten the
roll holder screw until the screw no longer turns
to fix the roll holder in place.
H
Fully insert the right roll holder.
Basic Operations
I
To ensure the roll holder is inserted into the roll
core sufficiently, push the center section on the
side of the roll holder towards the roll end twice.
c
46
Important:
If the roll holder is inserted into the roll core
insufficiently, media is not fed correctly
during printing because of slippage between
the roll holder and roll core.
This may cause banding in the print results.