Using Ink Cleaner; Cleaning; Cleaning Around The Print Head (Daily) - Epson SC-S70600 series User Manual

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Note:
The buzzer sounds 10 minutes after the print head is
moved (default setting). Press the Z button to continue
the cleaning process. After 10 more minutes have passed,
the buzzer sounds again.

Using Ink Cleaner

Use ink cleaner to clean around the print head, around
the caps, and the flushing pad only. Using ink cleaner on
other parts of the printer could damage the product.
Before starting this procedure, be sure to read the
following:
"Precautions regarding maintenance" on
U
page 102
A
Put the cup supplied with the ink cleaner on the
metal tray, and pour approximately 10 ml of ink
cleaner into the cup.
Maintenance
B
Dampen the cleaning stick with ink cleaner.
Do not allow ink cleaner to drip from the
cleaning stick.
When dampening a clean-room wiper with ink
cleaner, use ink cleaner poured into a cup.
c
Important:
❏ Do not reuse ink cleaner. Using dirty ink
❏ Used ink cleaner, cleaning stick, and
❏ Store ink cleaner at room temperature
❏ After using the ink cleaner, be sure to first

Cleaning

Cleaning Around the Print Head
(Daily)
If you notice any ink clots, lint, or dust when checking
the area around the print head, clean the area by
following the steps below.
SC-S70600 series, and SC-S50600 series have 2 print
heads. Clean both.
103
cleaner will make staining worse.
clean-room wipers are industrial waste.
Dispose of them in the same way as for
waste inks.
"Disposal of used consumables" on
U
page 126
out of direct sunlight.
close the inner cap and then the outer
cap. Failure to securely close these caps
may cause a leakage or volatilization of
the ink cleaner.