Epson SC-S70600 series User Manual page 22

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
: 1.5
: 2.0
: 2.5
❏
The media remaining is not displayed if Off is selected
for Remaining Setup in the Media Remaining menu.
"Media Remaining" on page 144
U
E
Ink cartridge status
Displays the approximate level of remaining ink and
the current status. When ink runs low or an error
occurs, the display changes as shown below.
Normal
1 Status indicators
The ink cartridge status is indicated as follows.
: Ready to print. The height of the
indicator changes with the level of ink
remaining.
: Ink is low. You need to prepare a new
ink cartridge.
: The level of ink remaining has reached
the limit. Replace the old ink cartridge
with a new one when using the
SC-S30600 series or when not using
spot color inks.
Replace the old ink cartridge with a new
one promptly when using spot color
inks. If the old cartridge is not replaced,
the print head or other parts may be
damaged.
: The ink cartridge is not latched. Lower
the lock lever to engage the latch.
: No ink cartridge is inserted. Insert the
ink cartridge and lower the lock lever to
engage the latch.
Introduction
Warning or error
1
2
22
: An error occurred. Check the message
on the screen, and clear the error.
: A Cleaning cartridge is installed. The
height of the indicator changes with the
level of cleaning fluid remaining.
Note:
You can also check the level of ink remaining using the
Ink Level option in the menus.
"The Ink Level Menu" on page 153
U
2 Ink color codes
SC-S70600 series
MS : Metallic Silver
LK : Light Black
BK : Black
C : Cyan
M : Magenta
Y : Yellow
OR : Orange
OR+ : Orange Plus
LC : Light Cyan
LM : Light Magenta
WH : White
SC-S50600 series
WH : White
BK : Black
Y : Yellow
M : Magenta
C : Cyan