Epson SC-S70600 series User Manual page 74

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
E
Lower the tensioner until it slightly touches to the
media.
F
Confirm that the media is attached without
looseness.
If the tension on the left and right of the media is
different in the areas shown in the illustration
below, the media will not be taken up correctly.
When one side is loose, restart the procedure
from Step 1.
Note:
You can confirm differences in tension by lightly
tapping both edges of the media as shown in the
illustration below.
Basic Operations
G
Continue holding down the d button until the
media has wrapped around once or twice.
H
Position the right and left tensioner media guides
until they slightly touch the media.
74