Epson SC-S70600 series User Manual page 69

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
D
Cut the left and right corners of the media as
shown in the illustration below.
Cutting the media prevents feeding problems,
such as the left and right corners of media being
folded and caught at the start of take-up.
E
Insert the roll core onto the right holder.
The following procedure varies depending on the
type of media unit installed.
When using the standard roll media system:
Proceed to step 6.
Basic Operations
When using the heavy roll media system
(optional): Proceed to step 7.
F
Push the holder until part A shown in the
illustration below is fully inserted, and tighten
the screw.
c
For the subsequent steps, depending on how
media is rolled, see:
For information on taking-up with printed side
out, see U
Facing Out" on page
For information on taking-up with printed side
in, see U
In" on page
69
Important:
Stop when part A is no longer visible. The
take-up reel unit may not function as
expected if the holder is inserted too far.
"Take-up with the Printed Side
70.
"Take-up with the Printed Side Facing
76.