Epson SC-S70600 series User Manual page 9

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
E
Tensioner media guide
The tensioner media guide prevents the take-up roll from skewing when using the auto take-up reel unit. When not
using the auto take-up reel unit, move the guide out of the way toward both edges of the tensioner.
"Using the Auto Take-up Reel Unit" on page 67
U
F
Tensioner
The tensioner maintains tension to prevent the media sagging as it is taken up.
G
Roll core holder locking screw
The locking screws keep the roll core holders in place once they have been attached to the roll core. There are same
parts on both the left and the right.
H
Roll support
Rest media temporarily on these supports when removing the take-up roll. There are same parts on both the left
and the right.
I
Auto switch
Use this switch to select the auto take-up direction. Choose Off to disable auto take-up.
J
Manual switch
Use this switch to select the manual take-up direction. The selected option takes effect when the Auto switch is in
the Off position.
K
Casters
There are two casters on each leg. Once installation is complete, the front casters should be kept locked while the
printer is in use.
L
Airflow vents
Allows air to flow into the printer. Do not obstruct these vents.
M
Waste ink bottle holder
Place the waste ink bottle in this holder.
N
Adjuster
The adjusters keep the printer in place. After installing the printer, keep it securely in place during use.
O
Waste ink bottle
Waste ink collects in this bottle.
Replace with a new waste ink bottle when the level approaches the line.
P
Waste ink tube
Waste ink is discharged from this tube. Be sure the end of this tube is in the waste ink bottle while the printer is in
use.
Q
Ink cartridges
Install all ink cartridges into each slot. Depending on the selected ColorMode, install the replacement cartridge or
Cleaning cartridge.
R
Lock levers
Raise the levers to unlock the ink cartridges prior to removal. Lower the levers to lock the cartridges in place after
insertion.
Introduction
9