Back - Epson SC-S70600 series User Manual

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
F
Wiper cleaner
The wiper cleaner removes ink from the wiper. This is a consumable; replace about once every three months.
"Replacing the Wiper and Wiper Cleaner" on page 120
U
G
Caps
Except during printing, these caps cover the print head nozzles to prevent them drying out. We recommend that
this unit be cleaned at the end of each workday.
"Cleaning Around the Caps (Daily)" on page 106
U
H
Wiper
The wiper removes ink from the print head nozzles. We recommend that this unit be cleaned at the end of each
workday. This is a consumable; replace about once every three months.
"Cleaning Around the Caps (Daily)" on page 106
U
"Replacing the Wiper and Wiper Cleaner" on page 120
U
I
Flushing pad
Ink is discharged onto this pad during flushing. This is a consumable; replace about once every three months.
"Replacing the Flushing Pad" on page 122
U

Back

A
Drive switch
The drive switch is used to feed the media during loading and to rewind the media for replacement.
B
Roll holder
Place media on these holders. There are same parts on both the left and the right.
Introduction
17