Epson SC-S70600 series User Manual page 131

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Item
All Nozzles
* "XX" indicates an ink color code.
Use Cleaning cartridge (available separately) for Head
Washing. The required number of Cleaning cartridge is
provided below.
❏ When specifying colors before cleaning: 2
❏ When cleaning all the nozzles: As shown below.
Product name Color mode
SC-S70600 series 10 Color
9 Color
8 Color (unfixed)
8 Color (fixed)
SC-S50600 5C Mode
*2
series
4C Mode
SC-S30600 series -
*1 Eight cartridges are required, excluding the two attached
cartridges.
*2 The number enclosed in parentheses indicates the number
of required cartridges when Head1 All Nozzles or Head2 All
Nozzles is selected.
Head Washing procedure
c
Important:
If the amount of remaining ink or cleaning fluid is
insufficient, the function may not run. When there
is an insufficient amount remaining, have new
cartridges on hand as a precaution.
Maintenance
Explanation
Clean all the nozzles of both the
print heads. Select this item
when faint or missing segments
of all colors of both print heads
are detected.
Cartridges
10
9
*1
8
8
10 (5)
8 (4)
4
Buttons that are used in the following settings
A
After confirming that the printer is ready, press
the # button.
The Maintenance menu will be displayed.
B
Use the d/u buttons to select Head Washing,
and press the Z button.
C
Use the d/u buttons to select any mode, and
press the Z button.
Then, follow the on-screen instructions to replace the
cartridge. When Ready appears on the screen, head
washing is completed. Print a nozzle pattern and inspect
the results to determine whether the problem has been
resolved.
"Printing nozzle check patterns" on page 128
U
Note:
In the SC-S70600 series or SC-S50600 series, if only one
print head has a clogged nozzle that cannot be cleared by
head washing, you can continue printing with the
unclogged head using the Head Mode setting in the
Printer Setup menu.
"The Printer Setup Menu" on page 149
U
If nozzle clogs cannot be cleared, contact your dealer or
Epson Support.
131