Epson SC-S70600 series User Manual page 56

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
R
Set the media holding plates at both sides of the
media.
Sliding media holding plates
While holding the tabs of the media holding
plates on both sides, move the plate to the edge of
the media.
Adjust so that the edge of the media is aligned to
the center of the round holes in the media
holding plates.
Insertable media holding plates
Position the media holding plates, while the
media is placed over them, in such a way that each
edge of the media is aligned to the middle of a row
of the round holes in the media holding plates.
(1) Align the white lines of the media holding
plates with the white lines of the platen.
(2) To keep the plates from lifting, push them
down until you hear a clicking sound.
Basic Operations
c
S
Close the front cover.
56
Important:
❏ Do not use the media holding plates with
media that is 0.4 mm or thicker. The
media holding plates could touch and
damage the print head.
❏ Always position the plates so that the
edges of the media are at the centers of the
round holes. Incorrect positioning causes
banding (horizontal banding, tint
unevenness, or stripes) during printing.
❏ Move the media holding plates to the left
and right edges of the platen when they
are not in use.
❏ Do not use the media holding plates if the
sides of the printed media are smudged or
torn.