Chapter 5 - Ports And Connectors; Rear Panel I/O Ports; Ps/2 Keyboard/Mouse Port - DFI DT122-SD User Manual

Chapter 5 - Ports and Connectors

Rear Panel I/O Ports

DVI-I
PS/2 KB/MS COM 1
USB 2.0*2 VGA DP++
The rear panel I/O ports consist of the following:
• 2 x GbE (RJ-45)
• 1 x RS-232 (DB-9)
• 4 x USB 3.0
• 2 x USB 2.0
• 1 x PS/2 Keyboard/Mouse port
• 1 x VGA
• 1 x DVI-I (DVI-D signal)
• 1 x DP++
• 1 x Line-out
• 1 x Mic-in
Chapter 5 Ports and Connectors
Chapter 5
LAN 1 LAN 2 Line-out
USB 3.0*4 Mic-in

PS/2 Keyboard/Mouse Port

PS/2 Keyboard/Mouse
This rear I/O port is used to connect a PS/2 keyboard/mouse.
Wake-On-PS/2 Keyboard/Mouse
The Wake-On-PS/2 Keyboard/Mouse function allows you to use the PS/2 keyboard or PS/2
mouse to power on the system.
Important:
The +5V_standby power source of your power supply must support ≥720mA.
21
www.dfi.com