Chapter 5 - Ports And Connectors; Rear Panel I/O Ports; Ps/2 Keyboard/Mouse Port - DFI WM343-SD330 User Manual

Chapter 5 - Ports and Connectors

Rear Panel I/O Ports

COM 1
PS/2 KB/MS
USB 2.0
VGA
The rear panel I/O consists of the following ports:
•

1 PS/2 Keyboard/Mouse port

• 1 Serial port
• 1 VGA
• 1 DVI-I (DVI-D Signal) port
• 1 DisplayPort
• 2 RJ45 LAN ports
• 4 USB 3.0 ports
• 2 USB 2.0 ports
• Line-in jack (optional)
• Line-out jack
• Microphone jack
Chapter 5 Ports and Connectors
LAN 1 LAN 2
DVI
Line-out
Mic-in
DP++
USB 3.0
Chapter 5
PS/2 Keyboard/Mouse Port
PS/2 Keyboard/Mouse
These ports are used to connect a PS/2 mouse/keyboard.
Wake-On PS/2 Keyboard/Mouse
The Wake-On-PS/2 Keyboard/Mouse function allows you to use the PS/2 keyboard or PS/2
mouse to power on the system. To use this function, configure the wake-up function of PS/2
keyboard/mouse in the Advanced menu ("ACPI Configuration" submenu) of the BIOS. Refer to
Chapter 7 for more information.
Note:
This port cannot work with a PS/2 mouse alone. To connect both keyboard and
mouse, please use a PS/2 keyboard mouse splitter cable adapter.
29
www.dfi.com