System Upgrade; Status - 4IPNET WHG315 User Manual

7) System Upgrade

The administrator can download the latest firmware from website and upgrade the system here. Click
Browse to search for the firmware file and click Apply for the firmware upgrade. It may take a few minutes
before the upgrade process completes and the system needs to be restarted afterwards to activate the new
firmware.
FTP firmware upgrade is also an
account name and password, and lastly specify the complete firmware filename stored on the FTP server
that will be used to upgrade the system.
To upgrade the system firmware, click Browse button to choose the new firmware file and then click Apply
button to execute the process. There will be a prompt confirmation message appearing to notify the
administrator to restart the system after successful firmware upgrade. (** Firmware upgrade may take up to
several minutes, please wait for the confirmation message)
The system must be rebooted before resetting to factory defaults after firmware upgrade.
G. Status
Status: Provides information for System Status, Interface Status, Hardware Status, Routing Table, Online Users,
Session List, User Logs and set up Notification Configuration.
option. Enter the FTP server IP address, FTP server port, and the FTP
351
WHG Controller / HSG Gateway
User's Manual
ENGLISH