Monitor Ip - 4IPNET WHG315 User Manual

User's Manual
WHG Controller / HSG Gateway ENGLISH
This function allows the administrator to set specific sets of the IP addresses at most for redirection purpose.
When the user attempts to connect to a destination IP address listed here, the connection packet will be
converted and redirected to the corresponding destination. Please enter the "IP Address" and "Port" of
Destination, and the "IP Address" and "Port" of Translated to Destination. Select "TCP" or "UDP" for
the service's type. These settings will become effective immediately after clicking Apply.

2) Monitor IP

Multiple IP addresses can be defined in the Monitor IP function. System can monitor these IP based network
devices and periodically report online status via email based on a configurable interval. These monitored
devices can be accessed via HTTP or HTTPS connection. The management interface of the monitored
device can be accessed via a hyperlink of device's IP address when the system is operated under NAT
mode.
327