I) Rogue Ap Detection - 4IPNET WHG315 User Manual

could be set up for more than one tree. Click Edit to change the WDS connection settings for the associated
WDS Tree.

WDS Update: Update the WDS connection with the following operations.
 Add: Add a new WDS connection with a Child AP not in the WDS and a Parent AP from the AP List. A new
WDS Tree will be added if the selected Parent AP is not in any of the current WDS Trees. Click Edit to
change the WDS connection settings for the new added WDS Tree.
 Move: Update a WDS connection with a Child AP from WDS and a Parent AP which could be connected
by WDS, and the previous WDS connection of the Child AP to the previous Parent AP will be deleted.
 Delete: All the WDS connections of the selected AP will be deleted including the WDS connections to its
Child APs, and the Child APs without wired connection will become unreachable.

i) Rogue AP Detection

It is designed to detect the non-managed or possibly malicious AP in the deployed environment. It takes
the managed APs as sensors to find the non-managed AP even if the AP uses the same SSID with
managed AP's. It shows the AP's BSSID, ESSID, Type, Channel, Encryption, and report time.

General Config: This configuration item contains the switch for turning on features within this tab page.
i.e. Rogue AP Detection as well as an optional "Channel Switching" feature.

Sensor List Config: This configuration item contains a listing of all currently managed APs under Wide
Area AP Management. Administrator may select one or more APs as sensors to scan for rogue AP.

Trusted AP Config: This configuration item allows the administrator to maintain a list of detected rogue
APs and remark them as trusted AP.

Rogue AP List: This window lists all the detected Rogue AP. Each rogue AP will be presented with
relevant information such as its BSSID, Channel, Encryption, Report Time etc. From the radio buttons at
WHG Controller / HSG Gateway
299
User's Manual
ENGLISH