B) List - 4IPNET WHG315 User Manual

AP status, Client List and WDS List information listed are collected from the remote AP via SNMP.

b) List

A list is to show the information of each managed AP, including Type, Name, IP Address, MAC Address,
online Status, # of Users, and Geographic location. Functions in this section also include the operations
such as Delete, Add to Map, Backup Config, Restore Config, and Upgrade.
All of the supported APs under management of the system will be shown on the list. In the beginning, the
list is empty. The administrator can add supported APs from the Discovery or Adding tabs. After APs are
added, this list will show the current managed APs including AP type, AP name, IP Address, MAC Address,
Status and geographic location. The administrator can Delete, Add to Map, Backup Config, Restore Config,
Upgrade the managed AP by checking the check box in front of each individual AP or select all the APs
together by checking the top check box.
WHG Controller / HSG Gateway
308
User's Manual
ENGLISH