System Overview; Rear Panel - 4IPNET HSG327 Quick Installation Manual

System Overview

Rear Panel

1 12
2A
2 Restart / Reset
3 WES Button (A
/ B)
4 LED Indicators
5 WAN
6 LAN Ports 1 - 2
WES LED
Copyright © 4IPNET, INC. All rights reserved.
Power Jack Socket for the power adaptor.
Press once to restart the system; Press and hold for more than 5 seconds to
reset to factory default.
WDS Easy Setup. Press the button to build up a WDS link with another peer. 2
WDS links can be set up per RF card.
6 indicators that displays the states of 6 various functions or progresses. The
numbers are explained on the leftmost side of the rear panel.
For attaching an Ethernet cable to an uplink service.
The ports for connections with LAN side devices.
For indicating WDS connection status.
Master (Press for more
than 3 seconds)
LED (Green) OFF and
WES Start
then BLINKING SLOWLY
BLINKING NORMALLY
WES Negotiate
(Green)
WES Timeout LED (Green) ON
WES Success LED (Red) ON
WES Fail LED (Green) ON
HSG327 Wireless Hotspot Gateway ENGLISH
2
Quick Installation Guide
Slave (Press once and
then release right away)
LED (Red) OFF and then
BLINKING SLOWLY
BLINKING NORMALLY
(Red)
LED (Red) ON
LED (Green) ON
LED (Red) ON