Customizing Pos Tickets - 4IPNET WHG315 User Manual

Terminal Auto Setup (TAS – Only available on SDS200W)
TAS refers to an automatic connection mechanism that requires NO previous network settings. Just press the
TAS button on SDS200W for three seconds, and it will automatically look for and associate to a suitable 4ipnet
gateway that supports this function.
The TAS connection will rewrite previous manual settings. You will see the Uplink page of the WMI grayed out and
the Status page will show that the system is in TAS mode. The TAS process takes about thirty seconds to
complete. Whether the connection attempt succeeds or fails, the SDS200W will always have the printer print out if
the connection is 'successful' or it 'failed.' Please make sure beforehand that the Ethernet cable is plugged in
The SDS100 can be set up the same way but it does not support wireless connections.
Wired TAS uses port 5000 as the default value. The controller has to set the port to the right
 Note:
number, as well. Additionally, when trying to deploy TAS, make sure that the table of Terminal
Server Configuration on the controller side is not filled up. Otherwise, the connection will fail.
.

11.4 Customizing POS Tickets

Configuration path:
For deployment flexibility on your hotspot, customization of POS tickets using
templates is supported on the WHG controller. Up to 5 ticket templates can be
saved on the system.
Main Menu >> Users >> Internal Authentication >> On-
Demand >> POS Tickets
WHG Controller / HSG Gateway
165
User's Manual
ENGLISH