Wan Traffic Control; Uplink Detection & Failover - 4IPNET WHG315 User Manual

3.2.4.

WAN Traffic Control

The Uplink and Downlink bandwidth configured here is the combined
bandwidth for WAN interface including WAN1 and WAN2. However, please
note that the actual bandwidth is still bounded by the network speed of your
ISP operator. For instance, when the network speed of your ISP is limited to
1Gbps, the total throughput under such constraint will not be greater than
1Gbps even if you configure 2Gbps on the Controller.
3.2.5. Uplink Detection & Failover
Uplink Detection
When the WAN interface has been configured with a valid uplink connection,
administrator may specify up to three outbound sites as detection target for
verifying whether the uplink service is alive or down. The controller will
periodically check the uplink status.
A field of warning message text may be customized by the administrator
which will be displayed on the user's web browser when all three detection
targets fail to respond.
WHG Controller / HSG Gateway
36
User's Manual
ENGLISH