2) Admin only needs to enter on AC2 Site-to-Site VPN settings:
Add a Remote Site
Add a Local Site
3) Once AC2 has configured its Site-to-Site VPN settings, establishment is
triggered by pressing the Quick-VPN buttons as follows:
Press and hold the Quick-VPN button on AC1 for around 5 seconds, release
the button when the corresponding Quick-VPN LED lights up. AC1 will enter
VPN waiting mode.
Press and hold the Quick-VPN button on AC2 for around 5 seconds, release
the button when the corresponding Quick-VPN LED lights up. AC2 will be in
VPN negotiating mode.
AC2 will automatically attempt to negotiate and establish site to site VPN
with AC1. AC1 requires no pre-configuration, and will automatically
configure a remote and local site based on AC2's request.
A successful VPN connection will be indicated by the corresponding LED on
AC2 and AC1 be lit up constantly in green.
16.2.3. Quick-Maintenance
Allow admin to copy system FW & configuration from one AC to two or more AC's
without having to access WMI.
1) The major application scenario for this button is when a device's dual image is
corrupted. Admin can use this button and copy a normal functioning device's
FW images to the corrupted device. This process can avoid having to RMA for
FW fixes.
WHG Controller / HSG Gateway
206
User's Manual
ENGLISH