Local Area Ap Management; Ap List - 4IPNET WHG315 User Manual

NOTE
1. Before the adding of AP's to any service zone, admin should set up a general
wireless environment for the zone in advance, which will be only be applied to
Locally managed APs.
2. Each AP will also be assigned one distinctive IP address once under
management. In the tag-based mode, the AP addresses are given by the DHCP
server in the default service zone; while in the port-based one, an AP will be
allocated an IP address by the DHCP server in its affiliated service zone.
7.2

Local Area AP Management

Configuration path:
This section handles the management of access points on the LAN side of your
4ipnet WHG controller. It starts with a methodology of adding access points to the
AP management list of a controller, all the way to the utilities that can be applied on
the controller to its managed AP's.

7.2.1 AP List

Configuration path:
>> AP List
All of the supported APs under management of the system will be shown in the list.
Check the checkbox for the desired AP Types and click "Apply" to display on the AP
List. A search can be performed based on AP Name, IP Address, MAC Address, and
Channel by selecting from the drop-down list. The AP's name will be shown as a
hyperlink. Click the hyperlink of each managed AP to further configure (General
Setting, LAN Setting, Wireless LAN, Layer 2 Firewall) the AP. Click the hyperlink of
the shown Status of each managed AP for detailed status information of the AP
Main Menu >> Access Points >> Local Area AP Management
Main Menu >> Access Points >> Local Area AP Management
WHG Controller / HSG Gateway
86
User's Manual
ENGLISH