Recommended Configuration Sequence; Common Settings - 4IPNET WHG315 User Manual

1.7 Recommended Configuration Sequence

Set up system's Time Zone, NTP server, DNS server and WAN1 address

Configure LAN address range for at least one Service Zone, and enable its

authentication.
Create user accounts to test the login page via wire line in the enabled Service

Zone.
Try to generate an On-Demand user and test the account.

Configure Wireless Settings of Service Zone and add in AP.

Configure necessary Service Zones based on applications.

Set up Group and Policy (including Firewall rules and Session Limit).

Customize the portal login page and add walled garden Advertisement links if

needed.
Set up Payment gateway to allow end user credit card self payment for On-

Demand accounts if needed.
Load SSL certificate for the Web Server before operation.

Monitor generated status pages and reports.

Perform other advanced setting for other specific application.

1.7.1.

Common Settings

For the most commonly deployed scenarios in a standard network, please
refer to Chapters 3 to 7.
Chapters 3 to 7 contain configuration topics that encompass the most
commonly used features in a typical network environment. It is recommended
for users to start from Chapter 3 and proceed through Chapter 7 for any
deployment.
1.7.2. Advanced Settings and Application
Chapters 8 to 10 discuss about security, system maintenance, and
monitoring. These contents are useful once you have successfully configured
WHG Controller / HSG Gateway
19
User's Manual
ENGLISH