Related Manuals for 4IPNET HSG200
Summary of Contents for 4IPNET HSG200
- Page 1 HSG200 V1.10 Wireless Hotspot Gateway 4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...
-
Page 2: Copyright Notice
4IPNET, INC. You may not alter or remove any copyright or other notice from copies of the content. All other brand and product names are claimed or registered marks of their respective companies or organizations. - Page 3 Quick Installation Guide HSG200 802.11n/b/g Wireless Hotspot Gateway ENGLISH FCC CAUTION This equipment has been tested and proven to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 4 This declaration is only valid for configurations (combinations of software, firmware, and hardware) provided and supported by 4ipnet Inc. The use of software or firmware not provided and supported by 4ipnet Inc. may result in the equipment no longer being compliant with the regulatory requirements.
-
Page 5: Package Contents
The HSG200 is the most economical and feature rich Wireless Hotspot Gateway, targeting mini-size stores that want to provide small, single-point wireless Internet access service. HSG200 is a perfect choice for beginners to run hotspot businesses. It does not cost much compared to buying a pile of equipments, nor does it take the skills of an expert to glue multiple applications out of multiple freeware. -
Page 6: System Overview
Power Socket For connecting to external power supply via the power adapter. (12VDC/1A) Rear Panel Attach antennas here. HSG200 supports 1 RF interface with 2 Antenna Connector SMA connectors. 4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299... - Page 7 Quick Installation Guide HSG200 802.11n/b/g Hotspot Gateway ENGLISH Top LED Panel LED ON indicates power on; OFF indicates power off. LED ON indicates WAN connection; OFF indicates no connection; BLINKING indicates transmitting data. LED ON indicates LAN1/LAN2 connection; OFF indicates no connection;...
-
Page 8: Hardware Installation
3. Connect HSG200 to your outbound network device. Connect one end of the Ethernet cable to the WAN port of HSG200 on the front panel. Depending on the type of internet service provided by your ISP, connect the other end of the cable to the ATU-Router of an ADSL, a cable modem, a switch or a hub. -
Page 9: Getting Started
1. Once the hardware installation is complete, set DHCP in TCP/IP settings of the administrator PC to “Obtain an IP address automatically”. Connect the PC to the LAN1 Port of HSG200. An IP address will be assigned to the PC automatically via the HSG200 built-in DHCP server. - Page 10 Quick Installation Guide HSG200 802.11n/b/g Hotspot Gateway ENGLISH 4. The Home Page will appear after a successful login. To logout, simply click Logout at the upper right hand corner of the Note: interface to return to the Administrator Login Page.
-
Page 11: Common Settings
HSG200 802.11n/b/g Hotspot Gateway ENGLISH Common Settings < Setup Wizard > HSG200 provides a Setup Wizard for quick configuration. To quickly configure HSG200 by using the Setup Wizard, click on the Setup Wizard button to start the configuration process. Step 1. General •... - Page 12 HSG200 802.11n/b/g Hotspot Gateway ENGLISH For security concern, it is strongly recommended to change the administrator's password. HSG200 supports NTP time synchronization. If NTP is the option selected, it is strongly recommended to make sure the NTP server is reachable and alive.
- Page 13 • Select desired wireless Band, Channel, and ESSID for public zone. • Click Next to continue. HSG200 supports two Virtual Access Points, one under Private zone and one under Public zone, with ESSID “HSG200-1” and “HSG200-2” respectively by default. The ESSID for VAP under Private will not be broadcasted.
- Page 14 Required is enabled. When authentication is enabled, a default authentication server shall be configured. HSG200 supports 4 kinds of authentication servers including Server 1 (LOCAL), Server 2 (RADIUS), Server 3 (RADIUS), and On-demand (ONDEMAND). • By default, the Default Auth Server is ONDEMAND.
- Page 15 Quick Installation Guide HSG200 802.11n/b/g Hotspot Gateway ENGLISH 4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...
- Page 16 • After you have printed out the ticket or noted down the Username and Password information. Close the account information window, return to Setup Wizard and click Next to continue. HSG200 supports four authentication servers, with internal authentication databases (LOCAL、ONDEMAND) and external authentication databases (RADIUS).
- Page 17 Quick Installation Guide HSG200 802.11n/b/g Hotspot Gateway ENGLISH • A Confirm and Restart message will appear on the screen during the restarting process. Please do not interrupt the system until the Administrator Login Page appears. The system is trying to locate a DNS server at this stage. Therefore, a Note: longer startup time is required if the configured DNS cannot be found.
-
Page 18: User Login
ESSID of HSG200 (e.g. “HSG200-2”) and get associated with this ESSID. 2. The client device will obtain an IP address automatically via DHCP from HSG200. Open a web browser on a client device, access any URL, and then the default User Login Page will appear. - Page 19 HSG200 802.11n/b/g Hotspot Gateway ENGLISH Congratulations! The Login Success Page will appear after a client has successfully logged into HSG200 and has been authenticated by the system. The appearance of Login Success Page means that HSG200 has been installed and configured properly.
-
Page 20: Deployment Example
Using wireless instead of wired service helps hotspot owners to build network service quickly. HSG200 supports two zones, Private and Public. In the Private Zone, authentication is not required to access the network via wired and wireless. Administrator can access the Web Management Interface (WMI) of HSG200 through the wired LAN port. - Page 21 Quick Installation Guide HSG200 802.11n/b/g Hotspot Gateway ENGLISH 4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...
- Page 22 Click Configure button of Public. Step 3: Configure ESSID for Public Zone Enter a desired ESSID for Public Zone in Wireless Settings: HSG200-2. Click Apply at the bottom of this page. 4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299...
- Page 23 HSG200 802.11n/b/g Hotspot Gateway ENGLISH Step 4: Configure ESSID for Private Zone Enter a desired ESSID for Private Zone in Wireless Settings: HSG200-1. Note: Private Zone ESSID will not be broadcasted. Select a desired Security Type for Private Zone for security enhancement if needed.
- Page 24 For further configuration and information, please refer to the User’s Manual. If you have purchased 4ipnet’s Network Ticket Generator and wish to incorporate it into your Hotspot, please follow the User Guide of Network Ticket Generator after you have installed and configured your HSG200.