D) Discovery - 4IPNET WHG315 User Manual

d) Discovery

This Discovery function is to manually or automatically detect the supported types of APs when
connected to the LAN ports and automatically assign a unique IP address to each AP discovered. Click
"Add" from the AP List and select "Find Multiple APs".
When Background AP Discovery function is enabled, the system will scan once every 10 minutes or
according to the time set by the administrator. If any AP is discovered and Auto Adding AP to the List is
enabled, it will be assigned an available IP from the starting IP address set in checked Service Zone
profile and applied with the selected template. You can also set the channel the AP would use.

AP Type: Select the AP model name which you like for the system to find.

Service Zone: Select the Service Zone for which the device connected AP is to be managed in.

VLAN for management: Set VLAN for management for the discovered AP.

Admin Settings Used to Discover: Select factory default if the connected AP's interface and
management credentials have not been changed. Otherwise, choose manual and specify the IP
range and management settings accordingly. The administrator may stop the controller from
scanning at any time during the discovery process.

Background AP Discovery: When configured, the system will periodically scan the configured
IP range for newly connected AP devices and automatically display the discovery results.

Discovery Results: Shows the AP devices detected that match the discovery criteria configured
above.
WHG Controller / HSG Gateway
288
User's Manual
ENGLISH